Thursday, August 28, 2014

Pressurized Pond Filter

Pressurized Pond Filter Size: 2000 UVI just purchased the Fishmate 500 UV filter. I have a small pond which I was using a Sunterra UV filter the UV stopped working and the pond has not been clear for months. I installed the filter on Friday and by Sunday you could see the gravel on the bottom. They recommend running the filter 24 hrs a day but I have been shutting off at night and it still cleaned up the pond. I is so easy to open and close, with my old filter it was a nightmare of trying to hold the "O" ring in place and line it up to close the plastic clamps. With the fishmate the "O" ring fits into a groove on the base and the top is easily put on and clamped shut, if I had known that it would work so well I would have optted for the 1000 UV. The only downside could be the recommended cleaning once a week.

This filter worked great. Cleared up my pond in 5 days. Crystal clear. The only down side is, it was not made clear that this filter requires a seperate outside pump to run it. So plan on spending another $100 on a pump and hoses.

Buy Pressurized Pond Filter Now

I purchased the 500p-UV to replace an existing filter/UV that sprung a leak in the seal that protected the UV light. The damage was going to cost $150 so I opted for a new unit. This one was a step down from the Oasis unit I had, but Oasis is no longer sold in the US. The problems I had with the Fish Mate were that the unit requires dissasembly for a weekly cleaning while better units only require the turn of a knob to back flush. Also, the 500 in the 500 P-UV means it works for a 500 gallon pond, but only a 350 gal/hour pump. The 1000 P-UV will go to a 650 gal/hour. That was not mentioned in the description. So its going back and I'm looking for a larger unit.

Read Best Reviews of Pressurized Pond Filter Here

Within just one week of installing the Fish Mate 500 our pond was cleared of the soupy green stuff. I squeezed out the filter pads once a week for about a month, then once a month,then hardly every. The pond water is clear and the plants and fish are thriving.

Want Pressurized Pond Filter Discount?

I have had a long standing problem for the last couple of years with two small ponds that are part of a water feature. I live on a barrier island and both ponds were pristine until they were flooded during a hurricane. Ever since then I've been fighting a losing battle with algae. The pond with the sunnier exposure had thick algae blooms that I found impossible to control. The water looked like pea soup. Periodically I'd dump Clorox in them which would kill the algae temporarily but the ponds would remain turbid. I tried pool shock... even went to the extreme of dumping an entire container of pool shock in there... but it wouldn't clarify.

Then I got the Fish Mate 500 filter.

I was a little uncertain as to how effective this was going to be so my installation was kind of temporary: I used a 300 GPH pump I had laying around along with 1/2" tubing I had to heat before I could get it stretched over the fittings on the filters. So the pump and its tubing are both smaller than the manufacturer intended.

I have watched this pond improve almost on an hourly basis since then. It is quite clear already and it hasn't run for a week yet. If it got no better I'd still be satisfied. I'm wondering what will happen when I clean it the first time: how much better can it get when it starts without that huge load of dead algae to contend with?

Since my ponds are directly adjacent to one another with just a narrow path between them, I'm thinking of alternating the use of the filter between one pond and the other. I'll just bury the tubing so it's not obvious and leave the filter itself located centrally. It does not have to be in the water itself. The only thing that must is the intake for the pump.

This is a GREAT product... I wish I'd bought one when my algae problem first took off. If there is any negative at all, be VERY careful when you remove the lid off the filter: there are some pretty flimsy plastic tabs located along its inside edges. I managed to break one off within my first minute of opening it. The tabs are probably there to help align the lid but losing one didn't seem to hurt anything. Still, I assume they're there for a reason.

No comments:

Post a Comment