EcoPlus Submersible Pump - 633 gph

I used this in my 400 gallon pond. So far it has worked very well. its well built and has a removable filter in the housing which can be cleaned and reused. It also comes with these fittings, two-.75" Barbed x .75" Threaded, two-.5" Barbed x .75" Threaded, .75" Barbed x 1.25" Threaded and Nozzle x .75" Threaded. The Inlet is 1.25" NPT and the outlet is .75" NPT. The power cord is 120 volt and 175 inch. Max height is 7.8 feet and 594 GPH. It take 35 watts of power to run this pump.

So far so good I'll update my review if I experience any issues.

This pump replaced one of unknown GPH which was oil lubricated and had leaked into the fountain. I chose this pump because I wanted something that had high GPH for the watts consumed as I run my pump 24/7.

After several months its working great. I have it enclosed in a filter box and I chlorinate the pond to keep out algae. The output is good but not great, but since I have nothing to compare the 633gph to, I can't accurately comment. This is well suited for my 4' x 6' x 1.5' Deep pond and could easily handle double the size.

Seems like a well made product for the price.

Buy EcoPlus Submersible Pump - 633 gph Now

I have this pump as my main pump in my 55gal resevoir for my hydroponics garden. It is very quiet. I have it pumping approximately 5 feet straight up and it has plenty of volume at that height. I even have to slow it down with a valve. Could go a few feet more and be just fine.

Read Best Reviews of EcoPlus Submersible Pump - 633 gph Here

This pump was a great buy! Very affordable and high quality suction. Had to buy a ball valve to reduce the flow of this pump. Great buy and shipped very fast!!

Want EcoPlus Submersible Pump - 633 gph Discount?

I have it pumping out of a 300g tank about 5' into the air to my gravel beds for an aquaponics setup. Working as intended and good flow.

Save 23% Off