Eheim 2075 Pro 3 Canister Filter - Up to 160 gal.

I've owned an Eheim 2217 for many years and it has operated flawlessly. I recently set up a new 110 gallon community tank and decided to spring on the latest Eheim model the 2075. It's only been running 2 months so perhaps my impression on this will improve, but so far it's been underwhelming.

As others have mentioned, the priming button doesn't really work. YOu have to press the buttom 20+ times...just when you're about to give up and try to do it the hard way then it springs to life.

Second, even after a 50% water change, my water is still cloudy. It doesn't seem to help...although I'm hoping this gets settled once the tank has been running a few more months.

If I can do this again, I would get the Eheim Pro II 2028, which has gotten MUCh better reviews.

** Edited 10/25/10 **

The cloudiness has settled and the tank is pristine. However, the priming button still doesn't work. I think I've isolated the cause the floating valve gets stuck in the cavity which prevents a suction from forming initially. I don't know what'll happen if I remove the float valve...maybe I'll try it next time.

Just like some of the other reviewers I have had considerable problems with leaks. The first time was after eight months of use. Eheim replaced the unit and now here I am a year later with another flood.

Buy Eheim 2075 Pro 3 Canister Filter - Up to 160 gal. Now

I have 3 big fancy goldfish in a 55g tank, which needs a lot of filtration because these fish produce a lot of waste. I was a first time buyer of an external canister filter and a first-time purchaser of an Eheim product. I had heard that older Eheim models were very reliable, but I ended up buying the Eheim Pro 3 2075 from Marine Depot because this model had a newer, sleeker design, and sounded easy to clean. I chose Eheim over other models because of Eheim's reputation. I bought the Eheim in April 2010. Several days ago, that is, a year and two months later, the filter is leaking water somewhere close to the electric cord, a complaint that other reviewers of this product have reported on Amazon and on numerous other forums. Upon finding this leak, I cleaned the filter, thoroughly checked for any cracks, plugged it back in, and it seemed to work fine. Fours hours later, I found a puddle of water by the filter yet again. I frantically shut off the filter, Googled "Eheim Pro 3 leaks" (try it yourself) and found that other people also experienced the exact same problem with this filter in the exact same spot. People also seemed to notice these leaks after one year of owning this filter, which is also my case. The Eheim Pro 3 series clearly has defects that the manufacturer needs to correct. Do not purchase filters from the Eheim Pro 3 line! When I installed this filter upon first receiving it, the filter worked beautifully and I was ecstatic with the results. Within the one year of owning it, I was able to change the filter media only 4 times with incredible ease. However, I think you only begin to see these leaks after the machine has been running for awhile. I'm disappointed with this product because I paid over $200 for the filter. But I guess as a first-time user of external canister filters, the lesson that I have learned is to not purchase an Eheim product ever again. I do not favor Eheims over other models because I lack experience in this hobby, but I do know from experience that this particular filter has failed me miserably.

Read Best Reviews of Eheim 2075 Pro 3 Canister Filter - Up to 160 gal. Here

This canister filter was purchased for a 90 gallon African Cichlid tank. I've owned my unit for approximately 2 weeks and purchased my filter for $250.00 I utilized cichlid sand that was not rinsed under manufacturer recommendation and absolutely clouded the water something terrible. The filter was able to make a significant difference in just 24 hours and absolutely cleared the water within 48-72 hours. I knew of the Eheim name and reputation and risked its purchase although I could not find many reviews on this particular model (2075). There were plenty available for the model 2080. Now, let's cut to the chase.

The Good:

1) Incredibly QUIET!!! There is absolutely no hum whatsoever during its operation. You know it's working because you will see the wave of surface agitation from the powerhead.

2) Very efficient as witnessed by me personally in clearing my milky water in just 48 hrs.

3) Relatively simple assembly and installation.

4) Simply hose disconnect feature to allow for cleaning the canister.

5) My model was a complete kit including all filters and substrate all inclusive.

The Bad:

1) The priming feature did not work well and exhausted me in the process. It took quite a while before it decided to work. I pumped the primer over and over and over and..........get the point? It did nothing. Eventually it started after one final attempt.

2) The substrate is very expensive.

3) No tilt and roll wheels on this model to assist with removing from your tank stand.

4) Input and output hoses were a bit difficult to seat on quick disconnect valve on motor head.

Truly, nearly a perfect filter for my 90 gallon aquarium. I would purchase this or any other Eheim product based on my experience with this filter. It deserves a 4.5 rating (because of the primer) but was not available.

Want Eheim 2075 Pro 3 Canister Filter - Up to 160 gal. Discount?

We purchased this the 2075 and with in 15 months it broke. It started leaking from the top. It was fantastic to come home from work to find 1/2 of a 130 gallon tank on the floor and a real scared fish. I contacted ehiem, after several emails they said it was a broken primer seal. Its suppose to have a 3 year warrenty... They would not send me one nor tell me where I could get one..... Save your money and go with another manufacture.